Connection Over Isdn - BinTec X4100 User Manual

4
Configuration Requirements
Unix
Remote configuration
58 BinTec Access Networks GmbH
Click OK.
A window with the login prompt appears. You are now in the SNMP shell of
X4100/200/300. Continue with
Type telnet <IP address of X4100/200/300> into a terminal.
A window with the login prompt appears. You are now in the SNMP shell of
X4100/200/300. Continue with
4.1.4

Connection Over ISDN

Connection over ISDN
if X4100/200/300 is to be configured or administrated remotely (remote LAN in
figure 4-2, page 59). This is also possible even if
initially configured, i.e. is still in the ex works state. Connection is then obtained
by means of a BinTec router that is already configured or an ISDN card in the
remote LAN, using a number of X4100/200/300's ISDN connection in your own
LAN (e.g. 1234).
It is thus possible for the administrator at a remote LAN to configure
300 in a home office which is hundreds of kilometers away. The
chapter 4.2, page
chapter 4.2, page
with ISDN login is especially recommended
X4100/200/300
60.
60.
has not been
X4100/200/
X4100/200/300