Ethernet/Lan Interface - BinTec X4100 User Manual

Features of Basic Unit
12.2.2

Ethernet/LAN Interface

Pin assignment of 10/100 Base-T Ethernet/LAN interface of basic unit (RJ45
socket, X4100, X4200 and X4300):
1 T+
2 T-
3 R+
4 Shield
Figure 12-2: 10/100 Base-T Ethernet/LAN interface (RJ45 socket) of basic unit with pin
assignment for X4100,
The LAN cable used must have the following technical features:
100 Base-T cable CAT5 STP (Shielded Twisted Pair)
8-pole RJ45 plug fully shielded at both ends
4 twisted wire pairs; the following wires are twisted:
– Pin 1+2
– Pin 3+6
– Pin 4+5
– Pin 7+8
Outer shielding for all four pairs.
5 Shield
6 R-
7 Shield
8 Shield
X4200 and X4300)
X4100/200/300 User's Guide
12
375