Subscribe to Our Youtube Channel
Related Manuals for BinTec X2250
Summary of Contents for BinTec X2250
- Page 1 ECHNICAL © Copyright April 13, 2005 Funkwerk Enterprise Communications GmbH Bintec User’s Guide - X2250 Version 1.0...
- Page 2 Purpose This document is part of the user’s guide to the installation and configuration of Bintec gateways run- ning software release 7.1.16 or later. For up-to-the-minute information and instructions concerning the latest software release, you should always read our Release Notes, especially when carrying out a software update to a later release level.
-
Page 3: Table Of Contents
X2250 ........ - Page 4 Bintec User’s Guide Technical Data...
-
Page 5: X2250
Ethernet cable (RJ45, red) for Ethernet connection – ISDN cable (RJ 45, black) for ISDN connection – Serial cable (gray) – Power supply ■ Bintec Companion CD ■ Documentation: – Quick Install Guide (printed) – User Manual (on CD) –... - Page 6 2x Ethernet IEEE 802.3 LAN 10/100 Mbps, auto sensing, MDIX ISDN-WAN S Built-in WLAN interface (antennas) 802.11b and 802.11g with Antenna Diversity Data Rates of 1-, 2-, 5.5-, 6-, 9-, 11-, 12-, 18-, 24-, 36-, 48-, 54 Mbps Bintec User’s Guide Technical Data...
-
Page 7: Leds
As the antennas are positionned with a distance of approx. one wave length, the signal quality can differ enormously. LEDs The LEDs on your X2250 Gateway indicate states and activity of the gate- way. Technical Data Bintec User’s Guide... -
Page 8: Connections
Data traffic via the WLAN interface. Table 1-2: LED status display in operational mode Connections All connections are located on the rear of the gateway. The gateway offers three Ethernet interfaces and no ISDN interface. The serial interface al- Bintec User’s Guide Technical Data... -
Page 9: Pin Assignments
1.5.1 Serial Interface For connecting a console the gateway provides a serial interface. Baud rates between 1200 and 115200 are supported. The connection is lead through as a MiniDIN socket: Figure 1-3: 8-pole MiniDIN socket Technical Data Bintec User’s Guide... -
Page 10: Ethernet Interface
A RJ45 socket is used for connecting: 1 ..8 Figure 1-4: Ethernet 10/100Base-T interface (RJ45 socket) The Ethernet interfaces (RJ45 socket) have the following pin assignment: Function TD + Bintec User’s Guide Technical Data... -
Page 11: Isdn Basic Rate Interface
A RJ45 socket is used for connecting: 1 ..8 Figure 1-5: ISDN S interface (RJ45 socket) The ISDN interface (RJ45 socket) has the following pin assignment: Function Not used Not used Send (+) Technical Data Bintec User’s Guide... - Page 12 X2250 Function Receive (+) Receive (-) Send (-) Not used Not used Table 1-5: RJ45 socket for ISDN connection Bintec User’s Guide Technical Data...
-
Page 13: Declarations Of Conformity
Declarations of Conformity Technical Data Bintec User’s Guide... - Page 14 Declarations of Conformity Bintec User’s Guide Technical Data...
Need help?
Do you have a question about the X2250 and is the answer not in the manual?
Questions and answers