Checking The Calling Party Number - BinTec X4100 User Manual

9
Configuration of Security Functions
Auto logout
CLID
Screening indicator
310 BinTec Access Networks GmbH
Caution!
All BinTec routers are shipped with the same user names and passwords. As
long as the password remains unchanged, they are not protected against unau-
thorized use. How to change the passwords is described in
page 69.
You must change the passwords as described in
Also make sure that unauthorized persons do not have access to the
X4100/200/300 power supply, serial console and
tion.
Until you have changed the default password for the user name admin, a warn-
ing is always given after logging in.
To make unauthorized access difficult, the connection to
connected if no keyboard entry is made for a period of 15 minutes. You can
change the time with the command t <time
chapter 13.1, page 392).
If you carry out a software update (see
deactivate auto logout as follows: Enter t 0 in the SNMP shell.
You can create additional user accounts with the aid of SNMP commands (see
the Software Reference). A certain password and a certain action can be
assigned to a user.
9.2.2

Checking the Calling Party Number

X4100/200/300 uses Calling Line Identification (
party number of an incoming call.
You can also determine whether calling party numbers have been modified by
the calling parties. With some connections, it is possible that another number
5678
(e.g. ) is displayed at the called party's terminal, instead of the calling par-
chapter 4.2, page
Ethernet
X4100/200/300
seconds> (see
in
chapter 10.2, page 359), you should
CLID) to check the calling
chapter 4.4.4,
60.
connec-
is dis-