Layer 1 Protocol (Isdn B-Channel) - BinTec X4100 User Manual

Settings Specific to WAN Partners
ISDN B-channel
7.2.6

Layer 1 Protocol (ISDN B-Channel)

You can define the Layer 1 Protocol of the ISDN
200/300 is to use for connections to the WAN partner. The default setting is the
protocol for 64-kbps ISDN data connections, which is the default value of the B-
channel. Only change the setting if expressly required.
This is configured in WAN P
Field
Layer 1 Protocol
Table 7-20: WAN P
ARTNER
For incoming calls that cannot be identified from the calling party number,
uses the settings under Item in menu CM-1BRI, ISDN S0
X4100/200/300
I C A
NCOMING ALL NSWERING
Answering", page 123).
Layer 1 Protocol contains the following selection options:
Possible Values
ISDN 64 kbps
ISDN 56 kbps
E A
ARTNER DIT DVANCED
Meaning
Defines which Layer 1 Protocol
is to use. This setting applies only to outgoing
calls to the WAN partner and to incoming calls
from the WAN partner, if they have been identi-
fied from the calling party number.
E A S
DIT DVANCED ETTINGS
as the Layer 1 Protocol (see
Meaning
For 64-kbps ISDN data connections. This is the
default value.
For 56-kbps ISDN data connections.
X4100/200/300 User's Guide
7
B-channel that X4100/
S
:
ETTINGS
X4100/200/300
"Incoming Call
203