X4E-2Fe Lan Interface Card For 10/100 Mbps - BinTec X4100 User Manual

12
Technical Data
386 BinTec Access Networks GmbH
The NT usually contains several LEDs that indicate its status. The information
in table 12-10, page 386
please refer to the User's Guide for your NT.
LED
1: Green
2: Red
3: Red
Table 12-10: NT LEDs and their status
12.3.3 X4E-2FE LAN Interface Card for
10/100 Mbps
Technical data for X4E-2FE expansion card:
Feature
Interfaces
Operating temperature
Relative humidity
Extensions
Table 12-11: Features of LAN expansion card
is largely standard information. In case of doubt,
Feature Meaning
NT LED on: Usually indicates that the
correct voltage is present.
UK2 LED on (or flashing): Usually indi-
cates that the S
not been activated at the
exchange. If this is the case, your
telephone provider must activate
the interface.
S2M LED on: Usually indicates that the
signals are not received by the ter-
minal.
Description
2 x 10/100 Base-T auto sensing
0 °C to 40 °C
20 to 90 % non-condensing in operation
5 to 95 % non-condensing in storage
Slot for resource card for encryption and com-
pression
interface has
2M