Serial Wan Interface For X4200 And X4300 - BinTec X4100 User Manual

12
Technical Data
Plugs
Socket
378 BinTec Access Networks GmbH
12.2.5 Serial WAN Interface for
The basic unit of X4200
unit of X4300 with two:
The serial port (Setup Tool menu
the following types of interface:
X.21/V.11
V.35/V.11
The setting in the Setup Tool Connector field (see
ables the port to be changed so that
DCE and DTE Mode.
Making the relevant settings in the Setup Tool Connector field physically
reverses the signal direction and the pin functions.
The cables to be used are not supplied with X4100/200/300, but can be ordered
from your dealer.
We recommend you use original BinTec cables, which you can buy from your
dealer.
The use of other cables may cause damage to your equipment and invalidates
the guarantee!
The description below first deals with the plugs generally used for X.21 and V.35
interfaces:
"DB-15 Plug for X.21", page 379
"M34 Plug for V.35", page 380
The serial port of the X4200
V.35 interfaces:
"26-Pole Mini Delta Ribbon Socket for X.21 and V.35 (X4200 and X4300)",
page 381
is equipped with one serial WAN interface and the basic
CM-SERIAL, S
ERIAL
X4100/200/300
and X4300 is then described, which provides X.21/
X4200 and X4300
) can be used as
U 0
NIT
table 6-11, page 133) en-
can be operated in both