Compression - BinTec X4100 User Manual

Settings Specific to WAN Partners
To do
Data compression
Possible Values
RIP V2
RIP V1 + V2
Table 7-28: RIP Send and RIP Receive
Proceed as follows:
Go to WAN P
ARTNER
Select the desired function of RIP Send.
Select the desired function of RIP Receive.
Confirm with OK.
Press SAVE until you return to the main menu.
Go to CM-100BT, F
Select RIP Send.
Select RIP Receive.
Press SAVE.
7.2.10

Compression

You can increase the data throughput and so reduce the connection costs by
using data compression.
pending on the
page 142):
STAC:
The industry standard STAC data compression (Check Mode 3 in RFC
1974) implemented in
the PPP ISDN connections.
Meaning
Enables sending and receiving of RIP packets
in version 2.
Enables sending and receiving of RIP packets
in both version 1 and version 2.
E IP A
DIT DVANCED
E A
AST THERNET DVANCED
X4100/200/300
encapsulation selected, e.g. PPP (see
X4100/200/300 can increase the data throughput on
X4100/200/300
S .
ETTINGS
S
.
ETTINGS
supports several options, de-
chapter 6.3,
User's Guide
7
213