Automatically Using Mxcontrolcenter Or Mxeasy - Mobotix Q25M Manual

112
/156
MxControlCenter
software (free download
from www.mobotix.com)
MxEasy
(free download from
www.mobotix.com)
Q25M Camera Manual: Operating the Camera

3.1.2 Automatically Using MxControlCenter or MxEasy

You can set up the camera's network parameters using the free-of-charge video manage-
ment software MxControlCenter or MxEasy (see Section 3.2.3 and Section 3.2.4 ). You can
also use one of these applications to automatically configure the network parameters of
MOBOTIX cameras that are not operating on the same IP address range as the computer.
Advantages
– You can connect the camera directly to the target network.
– The camera does not need to be physically accessible, that is, it may already
be mounted.
– The camera can be configured to automatically receive an IP address (optional).
– The network parameters can be manually set (optional).
– You do not need to access the camera software.
Requirement
– Either MxControlCenter or MxEasy must be installed on the computer.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com