Automatically Using Mxcontrolcenter Or Mxeasy - Mobotix D15D Manual

78
/124
MxControlCenter
control room software
(free download from
www.mobotix.com)
MxEasy
(free download
fromwww.mobotix.com)
D15D Camera Manual: Operating The Camera

3.1.2 Automatically Using MxControlCenter Or MxEasy

You can set up the camera's network parameters using the free video management
software MxControlCenter or MxEasy (see Section 3.2.3 and Section 3.2.4 ). You can also
use one of these applications to automatically configure the network parameters of a
MOBOTIX camera that is not operating in the same IP address range as the computer.
Benefits
– You can connect the camera directly to the target network.
– The camera does not need to be physically accessible, that is, it can remain
mounted to a pole, for example.
– The camera can be configured to automatically receive an IP address (optional).
– The network parameters can be manually set (optional).
– You do not need to access the camera software.
Requirement
– Either MxControlCenter or MxEasy must be installed on the computer.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com