MUTOH ValueJet 1604 Service Manual page 311

VJ-1604 Maintenance Manual
Part replaced or
adjusted
P_EDGE sensor
assembly
PF_ENC assembly
T fence
CR driven pulley
Table 7-1 Adjustment Item List(Continued)
Adjustment
order
1 P_EDGE sensor sensitivity adjustment
2 Side margin adjustment
1 PF_ENC assembly mounting position
adjustment
2 PF_ENC inspection
3 Side margin adjustment
4 Test printing
1 CR encoder inspection
2 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
3 Side margin adjustment
4 Test printing
1 CR belt tension adjustment
2 Side margin adjustment
Adjustment item
7-5
7 Adjustment
Reference
"7.10 P_EDGE
Sensor Sensitivity
Adjustment" p.7-41
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"7.6 PF Encoder
Assembly Position
Adjustment" p.7-30
"5.5.5 Encoder
Menu" p.5-17
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"5.7.7 Test
Printing Menu" p.5-42
"5.5.5 Encoder
Menu" p.5-17
"5.7.5 Uni-D/Bi-D
Low/High
Adjustment" p.5-35
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"5.7.7 Test
Printing Menu" p.5-42
"7.7 CR Speed
Reduction Belt
Tension Adjustment"
p.7-32
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
Rev.-05