MUTOH ValueJet 1604 Service Manual page 279

VJ-1604 Maintenance Manual
(4) Side Margin
This updates the side margin parameters.
(5) Ink Not-filled Flag
This updates the ink parameter. The setting items are as follows.
• User/: Charge: Initial wash completed, ink not filled.
• User/Init: Not ChargeÅFInitial wash incomplete, ink not filled
• User/Init: Charge: Initial wash completed, ink filled.
When selecting "Reset", be sure to install the cartridge.
[Enter]
[Enter]
Press [Setting/Value +] or [Setting/Value -] key
[Enter]
to change the set value
Range: 0.0mm to 20.0mm
(This sets the distance between the print head
[Enter]
and media edge sensor.)
When any parameter has been changed
[Enter]
[Enter]
[Enter]
Press [Setting/Value +] or [Setting/Value -] key
[Enter]
to change the setting items
"User/
"User/Init:Not Charge"
[Enter]
"User/Init:
When any parameter has been changed
[Enter]
5-59
5 Self-Diagnosis Mode
: Charge"
Charge"
Rev.-05