MUTOH ValueJet 1604 Service Manual page 310

7 Adjustment
Part replaced or
adjusted
Main board
assembly
CR motor assembly
PF motor assembly
Rev.-05
Table 7-1 Adjustment Item List(Continued)
Adjustment
order
1 Parameter backup
2 Firmware installation
3 Head rank input (no need for initial ink
charge)
4 Head nozzle check
5 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
6 Side margin adjustment
7 P_EDGE sensor sensitivity adjustment
8 P_REAR sensor sensitivity adjustment
9 Test printing
1 CR speed reduction belt tension
adjustment
2 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
3 Side margin adjustment
4 Test printing
1 Side margin adjustment
2 P_ENC position adjustment
3 Test printing
Adjustment item
7-4
VJ-1604 Maintenance Manual
Reference
"7.3.1 Parameter
Backup" p.7-9
"7.3.5 Firmware
Installation" p.7-16
"(1) Head Rank"
p.5-56
"5.7.1 Head Nozzle
Check Menu" p.5-25
"5.7.5 Uni-D/Bi-D
Low/High
Adjustment" p.5-35
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"7.10 P_EDGE
Sensor Sensitivity
Adjustment" p.7-41
"7.11 P_REAR
Sensor Sensitivity
Adjustment" p.7-44
"5.7.7 Test
Printing Menu" p.5-42
"7.7 CR Speed
Reduction Belt
Tension Adjustment"
p.7-32
"5.7.5 Uni-D/Bi-D
Low/High
Adjustment" p.5-35
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"5.7.7 Test
Printing Menu" p.5-42
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"7.6 PF Encoder
Assembly Position
Adjustment" p.7-30
"5.7.7 Test
Printing Menu" p.5-42