MUTOH ValueJet 1604 Service Manual page 84

4 Parts Replacement
4. Remove the screws (2 pieces) that retain the cover sensor (C) assembly_R.
No.
1
2
3
5. Remove the cover sensor (C) assembly_R.
6. To reassemble the unit, reverse the removal procedure.
The cover sensor looks like the following.
Opened
(2) L Side
1. Remove the side top cover L.
"4.2.7 Removing Side Top Cover L" p.4-14
2. Remove the switch cover L.
"4.2.13 Removing Switch Cover L" p.4-20
3. Detach the connector for the cover sensor (C) assembly_L.
Rev.-05
3
Cover sensor (C) assembly_R
Screws that retain the cover sensor (C) assembly_R
(pan-head screw with spring washer and flat washer M2
12)
Damper cover R
Part name
4-34
VJ-1604 Maintenance Manual
2
1
×
Closed