Replacing Fuse - MUTOH ValueJet 1604 Service Manual

4 Parts Replacement
5. Remove the MAIN board assembly.
6. Replace the MAIN board assembly.
7. To reassemble the unit, reverse the removal procedure.
8. Install the firmware.
"7.3.5 Firmware Installation" p.7-16
9. Install the parameters backup.
"7.3.1 Parameter Backup" p.7-9
4.4.8

Replacing Fuse

• Remove the AC inlet cable to replace the fuse before performing work.
You may suffer electric shock due to standby current.
• When replacing fuses, install the fuse which conforms to the specifications (250V-15A,
φ
10.31 mm x 38.1 mm).
• The double pole/neutral line has a fuse.
1. Open the board box 64.
"4.4.1 Opening Board Box 64" p.4-40
Rev.-05 4-54
VJ-1604 Maintenance Manual