Voltage Adjustment - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual
5.7.4

Voltage Adjustment

This menu is used to adjust the voltage of VSD 3 small dot so that the print position will be corrected.
Check the small dot is on the center of the middle dots in the CR direction.
When adjusting, change the voltage up to ±5V (0.1V increment) considering the current voltage as a basis.
The initial value is set to values that are suited for the manufacturer genuine ink.
Items
240 CW
240 CCW
320 CW
320 CCW
Adjusts the VSD 3-S at 240 cps / CW printing.
Adjusts the VSD 3-S at 240 cps / CCW printing.
Adjusts the VSD 3-S at 320 cps / CW printing.
Adjusts the VSD 3-S at 320 cps / CCW printing.
[Enter]
[Enter]
[>] key
[>] key
[>] key
[>] key
5-33
Contents
[<] key
[<] key
[<] key
5 Self-Diagnosis Mode
Rev.-05