4 Parts Replacement
4.6 Replacing X Rail Section
This section describes the procedure to replace the X rail section.
4.6.1
Replacing PF Speed Reduction Belt
Do not touch the motor right after starting-up the plotter. Otherwise, you may be burned.
1. Open the maintenance cover L.
2. Remove the side maintenance cover L.
"4.2.5 Removing Side Maintenance Cover L" p.4-12
3. Remove the rear side cover.
"4.2.8 Removing Rear Side Cover" p.4-15
4. Loosen the screws (2 pieces) that retain the PF motor assembly.
No.
1
2
3
4
5. Confirm that the PF speed reduction belt has been loosened.
Rev.-05
1
2
PF motor assembly
Screws that retain the PF motor assembly
(pan-head screw with spring washer and flat washer M4
8)
PF speed reduction belt
PF drive mounting plate
Part name
4-62
VJ-1604 Maintenance Manual
4
3
×