Introduction; Adjustment Item - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual

7.1 Introduction

This chapter provides information on necessary adjustment items and procedures.
"8.4 Jigs and Tools" p.8-5

7.2 Adjustment Item

This section describes the adjustment items required in part replacement procedures.
When you adjust or replace any of the maintenance parts listed in "Table 7-1 Adjustment Item List", you must
always adjust the plotout quality using the self-diagnosis function referring to Table 7-1"Adjustment Item
List"(p.7-3).
Part replaced or
adjusted
Printer head
Table 7-1 Adjustment Item List
Adjustment
order
1 Head rank input (including initial ink
charge)
2 Head nozzle check
3 Head slant check
4 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
5 Test printing
6 Reset of head unit life counter
Adjustment item
7-3
7 Adjustment
Reference
"(1) Head Rank"
p.5-56
"5.6 Ink Charging
Menu" p.5-22
"5.7.1 Head Nozzle
Check Menu" p.5-25
"5.7.3 Head Slant
Check Menu" p.5-28
"7.8 Head
Accuracy
Adjustment" p.7-35
"5.7.5 Uni-D/Bi-D
Low/High
Adjustment" p.5-35
"5.7.7 Test
Printing Menu" p.5-42
"5.11.1 Parameter
Initialization Menu"
p.5-52
Rev.-05