MUTOH ValueJet 1604 Service Manual page 213

VJ-1604 Maintenance Manual
3. Remove the screws (pan-head machine screw M3
assembly on the SW mounting plate.
3
4. Remove the VJ take-up SW board assembly.
5. To reassemble the unit, reverse the removal procedure.
(5) Replacing AC Cable Assembly
Remove the screws that retain the board chassis before replacing the AC cable assembly.
"(1) Removing Board Chassis" p.4-157
1. Remove the cable of the VJ take-up SW board assembly from the connector to the VJ take-up CNT board
assembly.
1
2 1
2
2
×
8: 4 pieces) that retain the VJ take-up SW board
No.
1
VJ take-up SW board assembly
2
Screw that retains the VJ take-up
SW board assembly (pan-head
machine screw M3
pieces)
3
SW mounting plate
No.
1 VJ take-up CNT board assembly
2 Cable of the VJ take-up SW
board assembly
4-163
4 Parts Replacement
Part name
×
8: 4
Part name
Rev.-05