MUTOH ValueJet 1604 Service Manual page 210

4 Parts Replacement
(2) Replacing VJ Take-up CNT Board Assembly
Remove the screw that retains the board chassis.
"(1) Removing Board Chassis" p.4-157
1. Remove the cable of the DC cable assembly and the VJ take-up SW board assembly from the connector
to the VJ take-up CNT board assembly.
1
2. Remove the screws (pan-head screw with spring washer and flat washer polished M3
retain the VJ take-up CNT board assembly on the board chassis.
1
3
3. Remove the VJ take-up CNT board assembly.
4. To reassemble the unit, reverse the removal procedure.
Rev.-05
2
3
2
2
4-160
VJ-1604 Maintenance Manual
No. Part name
1 VJ take-up CNT board assembly
2 DC cable assembly
3 Cable of the VJ take-up SW
board assembly
×
No. Part name
1 VJ take-up CNT board assembly
2 Screws that retain the VJ take-up
CNT board assembly (pan-head
screw with spring washer and
flat washer polished M3
pieces)
3 Board chassis
6: 4 pieces) that
×
6: 4