Introduction; Troubleshooting With Error Messages - MUTOH ValueJet 1604 Service Manual

9 Troubleshooting

9.1 Introduction

This chapter provides information on possible causes of machine errors/damage and recovery actions.
If the machine is malfunctioning and an error message is displayed on the operation panel, refer to

Troubleshooting with Error Messages"

displayed, refer to "9.3 Troubleshooting Without Error Messages"
If cause of errors/damage and recovery actions are not found in this chapter, or the machine cannot restore to
normal status, please contact the distributor your purchased the product from or our customer support center.
9.2 Troubleshooting with Error Messages
This section describes the messages displayed in normal operation and upon an error occurrence as well as
how to correct the error.
The available messages are as follows.
Priority Message type
1 Operation status
2 Error with
message
3 Error requiring
reboot
Rev.-05
p.9-2. If the machine is malfunctioning but no error messages are
Table 9-1 Error Message Type
Contents
Displayed when the machine is operating normally.
Displayed when an abnormal condition occurs
during normal operation.
Displayed when a serious error critical to the
machine operation occurs.
9-2
VJ-1604 Maintenance Manual
p.9-30.
Reference
Operation
Status" p.9-3
Errors with
Message" p.9-5
Errors
Requiring
Reboot" p.9-11
"9.2
"9.2.1
"9.2.2
"9.2.3