Avaya IP Office Installation Manual page 206

Ports Description
AUDIO 3.5mm Stereo jack socket. Used for external music on hold source input.
C/F TII Type 2 Compact Flash socket. Used for optional embedded voicemail card.
DC I/P DC power input port. Used for connection of the power lead from an Avaya un-earthed 45W external
power supply unit supplied with the control unit.
DS RJ45 socket. Digital Station port. Used for connection of IP Office
for out-of-building connections.
DTE 9-Way D-Type socket. Used for system maintenance. Suitable for direct connection of IP Office
Serial Port Feature Key dongle.
EXPANSION RJ45 socket. Used for direct connection to external expansion modules using the Expansion
Interconnect cable supplied with the expansion module.
EXT O/P 3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls.
The port contains two independent switches controlled by the IP Office.
LAN These ports form an unmanaged layer 2 Ethernet switch. The ports are full-duplex 10/100Mbps
auto-sensing, auto-MDI/MDIX.
PHONE Used for connection of analog phones. Not suitable for out-of-building connections. Four-wire analog
phones should be connected via a master socket containing ringing capacitors.
SLOT A Used for trunk cards of all types except WAN port trunk card. Normally Slot B should be used first.
Dual PRI trunk cards supported in Slot A only. Trunks cards are supplied with replacement external
SLOT B
blanking plates suitable for the trunk card port connections.
WAN 37-Way D-Type socket. Used for the connection of V.24, V.35 or X.21 WAN service.
Used for connection of a
recommended and for some locales may be a regulatory requirement.
All control units are available in either North America or Rest of World variants. The choice controls various default
settings of the unit. For E911 support a North American variant control unit must be used. The companding can be
changed once a unit is installed.
Item
IP406 V2 Office DS.
IEC60320 C13 Power Cord
IP400 Rack Mounting Kit
Control units are supplied with an external power supply unit but not a locale specific power cord.
IP Office Installation
IP Office
function or protective ground. Use of a ground for all systems is
Variant Country
A-Law Rest of World
U-Law North America
CEE7/7 Europe
BS1363 United Kingdom
NEMA5-15P America
China China
All
System Components: Control Units
supported DS phones. Not suitable
SAP Code
700343536
700359946
700289762
700289747
700289770
700261977
700210800
15-601042 Issue 20b (16 July 2009)
Page 205