Power Supply Cords - Avaya IP Office Installation Manual

2.11 Power Supply Cords

Each control unit and expansion module requires a switched power outlet socket rated at 110-240V ac, 50-60Hz.
Connection from that power outlet socket requires an appropriate locale specific power cord which is not supplied with
the unit and must be ordered separately.
Power cords must not be attached to the building surface or run through walls, ceilings, floors and similar openings.
Installation measures must be taken to prevent physical damage to the power supply cord, including proper routing of
the power supply cord and provision of a socket outlet near the fixed equipment or positioning of the equipment near a
socket outlet.
For locales not detailed below an appropriate power cord must be obtained locally.
Power Cord Type
Earthed Power Cords (IEC60320 C13)
Control Units
• IP500.
• IP406 V2.
• IP412.*
• Small Office Edition.
IP400 External Expansion Modules
• Digital Station V2.
• Phone V2.
• So8.*
• WAN3 10/100.*
IP500 External Expansion Modules
• BRI So8.
• Digital Station 16/30.
• Phone 16/30.
Unearthed Power Cord (IEC60320 C7)
IP400 External Expansion Modules
• Analog.
• Digital Station V1.
• Phone V1.
IP500 External Expansion Modules
• Analog Trunk 16.
*Older units were supplied with a 40W unearthed PSU and required an IEC60320 C7 power cord.
IP Office Installation
IP Office
Power Outlet Plug Type
CEE7/7 (Schuko)
BS1363
NEMA5-15P / CS22.2 No.42 North, Central
CPCS-CCC
CEE7/16 (Europlug)
BS1363
NEMA1-15
Locales SAP Codes
Europe and 700289762
South Africa.
Czech Republic, 700289747
Ireland, United
Kingdom.
700289770
and South
America.
China. 700261977
Europe and 700213382
South Africa.
Czech Republic, 700213374
Ireland, United
Kingdom.
North, Central 700213390
and South
America.
Korea. 700254519
China. 700314172
15-601042 Issue 20b (16 July 2009)
Page 34