Ip400 Expansion Modules - Avaya IP Office Installation Manual

10.7 IP400 Expansion Modules

The following IP400 external expansion modules are supported by IP Office 5.0. Except for the WAN3 10/100, these
modules can also be used with an IP500 control unit.
IP400 Analog Trunk Module (ATM16)
•
Provides an additional 16
Supports both loop-start and ground-start trunks.
• Available in a number of variants for different locales.
• Use with ground start trunks requires that the trunk module and the IP
Office control unit are grounded.
IP400 Digital Station Module (DS16/DS30)
•
Provides, depending on the variant, an additional 16 or 30
supported Avaya digital phones. This module has been superseded by the
Digital Station V2.
IP400 Digital Station Module V2 (DS16 V2/DS30 V2)
•
Provides, depending on variant, an additional 16 or 30
supported Avaya digital
module.
IP400 Phone Module (Phone8/Phone16/Phone30)
•
Provides, depending on variant, an additional 8, 16 or 30
analog phones. This module has been superseded by the Phone Module V2.
IP400 Phone Module V2 (Phone8 V2/Phone16 V2/Phone30 V2)
•
Provides, depending on variant, an additional 8, 16 or 30
analog phones. Supersedes the previous Phone module. With IP Office 3.1,
the Phone V2 supports a wider range of message waiting indication (MWI)
options than Phone V1 modules.
• With V2 units, the labeling of analog phone ports was changed from POT
to PHONE.
IP Office Installation
IP Office
ANALOG ports for connection of analog trunks.
phones. Supersedes the previous Digital Station
System Components: IP400 Internal Cards
DS ports for
DS ports for
POT ports for
PHONE ports for
15-601042 Issue 20b (16 July 2009)
Page 243