Oce CS230 Phase 3 User Manual page 93

Before making copies
No. Part Name
7 Exit tray 2
8 Misfeed-clearing dial in folding
section
9 Staple cartridge holder
10 Misfeed-clearing dial 1
11 Misfeed-clearing dial 2
12 Stapler unit
13 Front door
14 Punch kit*
* Parts marked with an asterisk (*) are installed within the finisher and therefore are not shown in
the illustration.
CS230 (Phase 3)
Description
Collects copies printed using the "Fold & Staple"
setting
Turned when clearing paper misfeeds in the folding
section (See p. 6-34.)
Removed from the stapler unit when clearing
jammed staples or replacing the staple cartridge
(See p. 10-15, p. 10-23.)
Turned when clearing paper misfeeds within the fin-
isher (See p. 6-34.)
Turned when clearing jammed staples or replacing
the staple cartridge, or for moving the staple car-
tridge holder out to the front (See p. 10-23.)
Pulled out when clearing jammed staples or replac-
ing the staple cartridge (See p. 10-15, p. 10-23.)
Opened when clearing paper misfeeds or jammed
staples or when replacing the staple cartridge (See
p. 10-15, p. 10-23.)
Punches holes for filing printed pages when punch
kit PK-501 is installed onto finisher FS-603
3
3-15