Utility
13.9
Adjusting the gradation levels
Adjust the gradation levels if there are changes in the color gradations of the
print image.
The following color gradation adjustments can be performed.
- [Copy]: The adjustment is made with stress on increasing the number of
images stored in the memory.
- [Printer (Gradation)]: The adjustment is made with stress on the
gradations in images.
- [Printer (Resolution)]: The adjustment is made with stress on the
reproducibility of text and lines.
The procedure for adjusting the gradation levels of the copy is described
below.
Requisite
0 After replacing an imaging unit, be sure to adjust the gradation levels.
0 The test pattern is printed on plain paper from a paper drawer loaded with
one of the following sizes (listed in order of priority): A3 w, 11 ×17 w,
A4 v or 8-1/2 × 11 v. Paper in the bypass tray cannot be selected.
1
Display the Administrator Setting screen.
–
For details on displaying the Administrator Setting screen, refer to
"Displaying the administrator setting screen" on page 13-59.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [8 Gradation Adjustment].
The Gradation Adjustment screen appears.
CS230 (Phase 3)
13
13-81