13
6
Compare the width of the left pages of the copy sample with the width
of the right pages to check for the center of the paper.
–
If the folding position is too far to the left of the center of the paper,
touch [+] to increase the adjustment (between 1 mm and 7 mm).
–
If the folding position is too far to the right of the center of the paper,
touch [–] to reduce the adjustment (between –1 mm and –7 mm).
–
To scroll through the values quickly, touch [+] or [–] continuously.
7
Touch [OK].
–
To cancel changes to the settings, touch [Cancel].
The half-fold position is adjusted.
If the folding position was at the center of the paper in step 6, this
completes the procedure.
8
Use the "Fold & Staple" function to print a another sample copy.
13-72
Utility
CS230 (Phase 3)