Oce CS230 Phase 3 User Manual page 674

14
Punch
Select the setting to punch holes in the copies for filing.
R
Red
Set this parameter to adjust the level of red in the image, for example, if you
wish to redden skin tones.
S
Saturation
Set this parameter to adjust the degree of vividness of the colors in the
image.
Save in User Box
Temporarily saves the job on the hard disk so that it can later be recalled and
used again.
Sharpness
Set this parameter to emphasize the edges of text so that they can be read
more easily. In addition, this parameter can be used to adjust the document
image.
Sheet/Cover/Chapter Insert
Select from the functions that are available to edit copies as desired.
Sort
Select this setting to separate each set of the copies. The second copy set
is printed after all of the first copy set is finished.
Staple
Select a setting to staple copies together.
T
Text Enhancement
Select a setting for the reproduction quality of text when copying documents
consisting of text that overlaps images such as illustrations or graphs (text
with a background).
Thick Original
Select this setting when loading thick documents or document pages pasted
together into the ADF. If this setting is selected when thick documents are
scanned with the ADF, there is a smaller chance of a paper misfeed
occurring.
X
XY Zoom
Touch this button to use the keypad to specify the zoom ratio for producing
an enlarged/reduced copy of the loaded document.
14-10
Appendix
CS230 (Phase 3)