Oce CS230 Phase 3 User Manual page 476

Replacing toner cartridges and staples and emptying waste containers
10
6
Position the toner cartridge as
shown, and then insert it into its
compartment.
7
Swing the toner-cartridge-securing
lever up clockwise.
– Make sure that the toner-
cartridge-securing lever is fully
swung up, as shown, otherwise
the front door cannot be closed.
8
Slowly pull out the charger-cleaning
tool as far as possible.
Next, slowly push in the charger-
cleaning tool as much as possible.
Repeat the above operations three
times.
9
Securely insert the charger-cleaning tool, and then close the front door.
Why can't the door be closed securely?
?
% The toner-cartridge-securing lever may not be in its correct
position. Check that the toner-cartridge-securing lever is correctly
positioned.
10-8 CS230 (Phase 3)