Oce CS230 Phase 3 User Manual page 462

9
– To make fine adjustments to the printing position, touch [Change
Adjustment]. Select the desired direction under "Left & Right
Adjustment" or "Top & Bottom Adjustment", use the keypad or
touch [–] and [+] to specify the adjustment setting, and then touch
[OK].
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adj.].
? What happens when a value outside of the allowable range is
specified?
% The message "Input Error" appears. If "Input Error" appears or if the
adjustment value was incorrectly entered, touch [No Adj.] or press
the [C] (clear) key, and then specify the correct value.
6
Touch [OK], and then touch [OK] in the next screen that appears.
7
If necessary, specify any other copy settings.
8
Using the keypad, type in the desired number of copies.
9
Press the [Start] key.
9-80
Application functions
CS230 (Phase 3)