Oce CS230 Phase 3 User Manual page 323

Troubleshooting
5
Turn misfeed-clearing dial 1
clockwise until the removal indicator
is completely blue.
What should be done if the
?
misfeed-clearing dial 1 is turned
too far?
% Turn the misfeed-clearing dial 1
counterclockwise to finely adjust
it.
6
Open the upper door of the finisher,
and then pull out any paper in the
feed section.
7
Close the upper door.
8
Remove all paper fed into the exit
tray 1.
CS230 (Phase 3)
Misfeed-
Removal indicator
clearing
dial 1
6
6-35