9
4
Using the keypad, type in the starting page number.
–
If necessary, touch [Chapter], and then use the keypad to type in
the chapter number.
–
The setting for "Page #" can be set to a number between -99999
and 99999, and the setting for "Chapter" can be set to a number
between -100 and 100. When specifying a starting number, switch
the number between positive and negative by pressing the [ ] key.
If a negative value is specified, the numbers are not printed until the
numbering reaches 1. For example, if "-1" was specified, the
numbers are printed starting with "1" on the third copied page.
–
To cancel changes to the settings, touch [Cancel].
–
To cancel the "Page #" function, touch [OFF].
5
Specify the page number format.
6
Touch [Print Position], and then select the printing position.
9-82
Application functions
CS230 (Phase 3)