Oce CS230 Phase 3 User Manual page 262

5
4
Touch [Check Job].
The Mode Check screens for the copy job appear.
The buttons for functions where the setting has been changed from the
default appear selected.
5
Check the copy settings registered with the selected copy program.
6
Touch [Job End].
The Recall Copy Program screen appears again.
Can different settings be displayed?
?
% To display the previous screen, touch [
next screen, touch [Fwd.
7
Again touch the button for the program with the desired copy settings.
– If [OK] is touched with no copy program selected, the Basic screen
appears again without a copy program recalled.
5-16
Additional copy operations
Back]. To display the
].
CS230 (Phase 3)