Oce CS230 Phase 3 User Manual page 629

Utility
– Do Not Synchronize:
This setting requires that all information be entered for user
authentication and account track each time that the machine is
used.
11
Beside "# of Counters Assigned for Users", specify the desired setting.
– Press the [C] (clear) key to erase the value, and then use the keypad
to specify the desired value (between 1 and 999).
– If user authentication and account track settings have been
applied, counters can be assigned to both accounts and users, and
counts for both can be totaled.
12
Touch [OK].
– If the setting for "User Authentication" or "Account Track" was
changed, the message "Are you sure you want to clear all data?"
appears.
13
Touch [Yes].
The authentication method is set.
Continue by specifying settings for user authentication and account
track.
Reminder
Do not differentiate between uppercase and lowercase letters in the user
name for the external server. Since the CS230 cannot differentiate
between uppercase and lowercase letters, the operation may not be
performed correctly.
Note
If optional image controller IC-402 is being used, but is turned off and
"User Authentication" is set to "ON (External Server)", a message
appears when the main unit is turned on, indicating that the image
controller be turned on. Since authentication of the external server
cannot be performed, turn on image controller IC-402.
If image controller IC-402 is already on when this message appeared,
wait a while since the image controller may just be starting up.
CS230 (Phase 3)
13
13-89