Oce CS230 Phase 3 User Manual page 587

Utility
Reminder
If user authentication or account track operations are being performed,
they will be canceled after 1 minute, even if the "System Auto Reset"
parameter has been set to "OFF". However, the Enlarge Display mode is
not canceled when the "System Auto Reset" parameter is set to "OFF".
If user authentication settings have been specified or "Enhanced Security
Mode" has been set to "ON", logout from Administrator mode or user
authentication mode will be performed according to the "System Auto
Reset Time" parameter.
User box setting
Parameter
Delete Unused User Box
Delete Secure
Print Documents
Auto Delete
Secure Document
Standard size setting
Parameter
Original Glass Original
Size Detect
Foolscap Size Setting
Note
For details on displaying [Standard Size Setting], contact your technical
representative.
CS230 (Phase 3)
Description
Specify settings for using boxes. For details, refer to the User man-
ual [Box Operations].
Specify settings for using boxes. For details, re-
fer to the User manual [Box Operations].
Description
Paper size table 1 or 2 can be selected to
change the available settings when the paper
size is detected. For details, contact your tech-
nical representative.
The Foolscap paper size can be changed. There
are four Foolscap sizes: 220 × 330 mm, 8-1/2 ×
13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w, and 8 ×
13 w. For details, contact your technical repre-
sentative.
13
Default Setting
1 day
Default Setting
Table 1
8 × 13 w
13-47