Oce CS230 Phase 3 User Manual page 284

5
The Auto Reset Notification screen
appears.
3
Touch the button for the desired display time.
– To not display the message requesting confirmation to reset the
settings in Enlarge Display mode, touch [OFF].
– To display the message requesting confirmation to reset the
settings in Enlarge Display mode, touch the button ([30 sec.], [60
sec.], [90 sec.] or [120 sec.]) for the length of time that the message
is to be displayed.
– To cancel changes to the settings, touch [Cancel].
4
Touch [OK].
The Accessibility Setting screen appears again.
5
Touch [Close], or press the [Accessibility] key.
The Basic screen appears again.
5-38
Additional copy operations
CS230 (Phase 3)