13
–
Touch [All Account] to apply the settings in the current screen to all
registered accounts. Touch [All Accounts], and then touch [OK] in
the two screens that appear to display a message and apply the
settings to all accounts. At this time, do not turn off the machine
with the main power switch.
–
If "Color" of the "Print" is set to "Restrict", printing is not possible
with the "Full Color", "2 Color" or "Single Color" settings.
–
If "Black" of the "Print" is set to "Restrict", printing is not possible
with the "Black" setting.
–
If both "Color" and "Black" of the "Print" are set to "Restrict", the
message "Copying is restricted." appears if authentication was
completed correctly.
–
If "Color" is set to "Restrict" under "Send", color scanning is not
possible.
13
Touch [OK].
The output permissions are set.
14
Touch [Max. Allowance Set].
The Max. Allowance Set screen appears.
13-110
Utility
CS230 (Phase 3)