Oce CS230 Phase 3 User Manual page 205

Basic copy operations
– If "2
original direction, otherwise the copies will not be printed as
desired.
– If the binding position for the document is set to "Auto", the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the document length
is 297 mm or less. If the document length is more than 297 mm, a
binding margin along the short side of the paper is selected.
– If the binding position for the document is set to "Auto", the binding
margin is set at the top or at the left.
– For a double-sided document, touch [Binding Direction], select the
binding position for the document, and then touch [OK].
3
Touch [Original Direction], select the orientation of the loaded
document, and then touch [OK].
– For details on specifying the document orientation, refer to
"Selecting the document orientation (Original direction settings)" on
page 4-29.
4
Touch [OK].
The Basic screen appears again.
CS230 (Phase 3)
1" is selected, specify the binding direction and the
4
4-63