Oce CS230 Phase 3 User Manual page 671

Appendix
Blue
Set this parameter to adjust the level of blue in the image, for example, if you
wish to emphasize the blue of water or the sky.
Brightness
Set this parameter to make the image either lighter or darker.
C
Change Tray Settings
Touch this button to specify a paper size not loaded in a paper drawer or to
copy on paper other than plain paper.
Chapters
Set this function to specify chapter title pages that must be printed on the
front side of the paper when printing double-sided copies.
Color Balance
Set this parameter to adjust the balance in the concentrations of cyan (C),
magenta (M), yellow (Y) and black (K). Each color can be finely adjusted to
any of 19 levels between –3 and +3.
Combine Originals
Select a setting to arrange reduced copies of multiple document pages on a
single copy page. The settings for the number of pages that can be
combined are "2 in 1", "4 in 1" and "8 in 1".
Contrast
Set this parameter to adjust the contrast between light and dark.
Copy Density
Set this parameter to finely adjust the copy density to any of 19 levels
between –3 and +3.
Cover Mode
Set this function to add paper from the specified paper drawer to the copies
as a cover page.
D
Density
Select a setting to adjust the density of the print image to one of nine levels.
Duplex 2nd-Side
Select this setting to switch the image transfer current of this machine when
copying on paper that has already been printed on one side.
E
Edit Color
Set the functions and parameters that are available to adjust the print image
as desired.
CS230 (Phase 3)
14
14-7