Oce CS230 Phase 3 User Manual page 486

Replacing toner cartridges and staples and emptying waste containers
10
11
Insert the staple cartridge holder,
making sure the tabs on the holder
slide along the rails in the
compartment.
12
Insert the staple cartridge holder until
it locks into place.
– Check that the staple cartridge
holder is securely installed.
13
Carefully move the stapler unit back into its original position.
14
Close the front door.
Reminder
Be sure to replace the staple cartridge only after the message appears,
otherwise the machine may be damaged.
10-18 CS230 (Phase 3)