Before making copies
4
Load the paper into the left side of
the paper drawer for the LCT so that
the side of the paper to be printed on
(the side facing up when the package
was unwrapped) faces up.
–
Load letterhead paper so that the side to be printed on faces down.
5
Close the paper drawer for the LCT.
Reminder
Be careful not to touch the film.
Do not load so many sheets of paper that the top of the stack is higher
than the , mark.
For details on the paper that can be loaded into the LCT, refer to "Copy
paper/Original documents" on page 8-3.
CS230 (Phase 3)
, mark
3
3-57