Oce CS230 Phase 3 User Manual page 364

8
4
Touch [Standard Size].
The Standard Size screen appears.
5
Touch [
– Touch [
displayed.
– If "A6 Card w" is selected, "Thick 3" is automatically selected. If
paper other than postcards is loaded, change the paper type
setting. For details on the paper type settings, refer to "To specify
a setting for special paper" on page 8-23.
6
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
The paper size for the 1st drawer is set.
Reminder
If paper other than the specified paper size is loaded, a paper misfeed
may occur since the paper size is not automatically detected.
8-12
] twice, and then touch [A6 Card w].
] and [ ] until the button for the desired paper size is
Copy paper/Original documents
CS230 (Phase 3)