Oce CS230 Phase 3 User Manual page 207

Basic copy operations
– If the binding position for the copy is set to "Auto", the binding
position is automatically determined according to the orientation of
the loaded document. If the document length is 297 mm or less, a
binding position along the long side of the paper is selected. If the
document length is more than 297 mm, a binding position along the
short side of the paper is selected.
– If the binding position for the copy is set to "Auto", the binding
position is set at the top or at the left.
3
Touch [Binding Direction].
– For a single-sided document, select the binding position for the
copy, and then touch [OK].
– For a double-sided document, select the binding positions for the
document and the copy, and then touch [OK].
CS230 (Phase 3)
4
4-65