Oce CS230 Phase 3 User Manual page 121

Before making copies
A message appears, requesting confirmation to log off.
8
Press the [Yes] key.
The user name and password input screen appears again.
!
Detail
For details on specifying user authentication settings, refer to "User
authentication/Account track" on page 13-49.
Note
The user authentication settings can be used together with the account
track settings. If the "Synchronize User Authentication & Account Track"
parameter is set to "Synchronize", complete user authentication, and
then log on by using the account track input screen.
User authentication settings can be specified using the User
Authentication Setting parameters in Administrator mode, available from
the Utility mode. Settings should be specified by the administrator.
If a list of user names can be displayed, the desired user name can be
selected from the list. Touch [List], touch the button for the desired user
name to select it, and then touch [OK].
Users who have no access to a user name and password can touch
[Public User Access] to use this machine. For details on specifying public
user settings, refer to "To select an authentication method" on
page 13-87 and "Authenticating public users" on page 13-96.
CS230 (Phase 3)
3
3-43