Oce CS230 Phase 3 User Manual page 325

Troubleshooting
13
Slide the finisher back against the machine.
Reminder
If the message "Misfeed detected." appears, be sure to open the front
door, turn the misfeed-clearing dial until the removal indicator is
completely blue, and then remove the paper. If the paper is pulled out
with too much force, the finisher may be damaged.
Do not pull paper remaining in the transfer unit out with too much force,
otherwise the folding unit may be damaged.
Reminder
Be careful that your fingers are not pinched when the front door is closed.
!
Detail
For details on the positions of paper misfeeds, refer to "Paper misfeed
indications" on page 6-9.
CS230 (Phase 3)
6
6-37