Oce CS230 Phase 3 User Manual page 164

4
10
Load the next batch of the document, and then press the [Start] key.
– Repeat this step until all pages of the document have been
scanned.
– The amount of memory available can be checked beside "Memory"
in the upper-right corner of the Basic screen.
– To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to "Stopping scanning/printing" on
page 4-103.
– To change the scanning settings, touch [Change Setting]. For
details on changing the scanning settings, refer to "To change scan
settings for each document" on page 4-37.
– The buttons that appear in the Change Setting screen differ
depending on the specified settings. Settings for the following can
be changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
4-22
Basic copy operations
CS230 (Phase 3)