Oce CS230 Phase 3 User Manual page 616

13
– Each time [+] or [–] is touched, the value is increased or decreased
by one increment.
– If horizontal lines A and B are aligned, skip to step 11.
9
Press the [Start] key.
The adjusted test pattern is printed.
When is the adjustment applied?
?
% The adjustment is applied when the [Start] key is pressed. To
cancel the adjustment, touch [Cancel] instead of pressing the
[Start] key.
10
Check the print result.
– If more adjustment is necessary, repeat steps 7 and 9.
11
Touch [OK].
13-76
Utility
CS230 (Phase 3)