Oce CS230 Phase 3 User Manual page 253

Additional copy operations
6
In the Change Job Setting screen, change the copy settings as desired,
and then touch [OK].
– To cancel changes to the settings, touch [Cancel Change].
? Why is the button for the setting that I wish to change not
displayed?
The copy setting cannot be changed.
% If the copy settings cannot be changed, stop printing the proof
copy. Then, press the [Reset] key to cancel the copy settings, and
then specify the desired settings.
7
Press the [Proof Copy] key to print another sample copy.
– If copying stops while the proof copy screen is displayed after the
proof copy was printed, press the [Reset] key.
Otherwise, from the list of jobs on sub display area, select the proof
copy job that stopped, and then touch [Delete]. In the screen that
appears, requesting confirmation to delete the copy program,
touch [Yes].
CS230 (Phase 3)
5
5-7