Oce CS230 Phase 3 User Manual page 457

Application functions
4
Check the document size under "Original Size", and then touch [OK].
– If the document size does not appear or to specify the document
size, touch [Standard Size], and then specify the document size
from any of the screens.
– When the document is loaded into the ADF, the document size
does not appear. If a standard-sized document is loaded, the
document size is automatically detected after the [Start] key is
pressed. If a non-standard-sized document is loaded, the
document size is not detected. Therefore, specify the document
size in the Custom Size screen, and then press the [Start] key.
CS230 (Phase 3)
Standard Size screen
Custom Size screen
Photo Size screen
9
9-75