Oce CS230 Phase 3 User Manual page 147

Basic copy operations
4
Using the keypad, type in the desired
number of copies.
– If the number of copies was
incorrectly entered, press the [C]
(clear) key in the keypad, and
then specify the correct number
of copies.
5
Press the [Start] key.
– To stop the copy operation being
performed, press the [Stop] key.
For details, refer to "Stopping
scanning/printing" on
page 4-103.
– The next copy operation can be
queued while a copy operation is
being performed. For details,
refer to "Scanning the next document to be copied while a copy job
is being printed (Next Job Reservation)" on page 4-101.
CS230 (Phase 3)
4
4-5